卢淋,唐荻,江海涛

• 1:北京科技大学冶金工程研究院

摘要(Abstract)：

实验室研发了一种高铝1000 MPa级的冷轧热镀锌双相钢,从化学成分、热镀锌退火工艺以及显微组织和性能等方面对其进行实验研究。实验结果表明:实验钢的Ac1、Ac3、Ms分别为757、950、410℃,经过热镀锌退火后,实验钢的室温组织为典型的马氏体+铁素体双相组织,马氏体精细结构为板条状,且随着退火温度的升高,马氏体含量增加,屈服强度和抗拉强度升高,伸长率保持在12%以上。

关键词(KeyWords)： 高铝;热镀锌双相钢;CCT曲线;组织性能

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 卢淋,唐荻,江海涛

DOI: 10.13289/j.issn.1009-6264.2015.04.020

参考文献(References)：

• [1]Takehide SENUMA.Physical metallurgy of modern high strength steel sheets[J].ISIJ International,2001,41(6):520-532.
• [2]康永林.现代汽车板工艺及成形理论与技术[M].北京:冶金工业出版社,2009.
• [3]金光灿,赵爱民,赵征志,等.1000MPa级冷轧热镀锌双相钢的研发[J].轧钢,2010,27(1):28-31.JIN Guang-can,ZHAO Ai-min,ZHAO Zheng-zhi,et al.Development of 1000MPa cold rolling hot dip galvanized dual phase steel[J].Steel Rolling,2010,27(1):28-31.
• [4]Sarkar P P,Kumar P,Manna M K,et al.Microstructural influence on the electrochemical corrosion behaviour of dual-phase steels in 3.5%Na Cl solution[J].Materials Letters,2005,59(19/20):2488-2491.
• [5]李慧远.汽车用热镀锌钢板的生产及应用[J].汽车工艺与材料,2011(6):42-45.LI Hui-yuan.The production and application of galvanized steel[J].Automobile Technology&Material,2011(6):42-45.
• [6]Song T,Kwak J,de Cooman B C.On the processing of martensitic steels in continuous galvanizing lines:part II[J].Metallurgical and Materials Transactions A,2012,43(1):263-280.
• [7]邸洪双,蒋光炜,鲍成人.高强钢板热镀锌工艺研究现状[J].河南冶金,2009,17(1):1-5.DI Hong-shuang,JIANG Guang-wei,BAO Cheng-ren.Research situation of high strength galvanized steel[J].Henan Metallurgy,2009,17(1):1-5.
• [8]张明明,刘丹丹,杨同康,等.热镀锌工艺及性能研究[J].中国新技术新产品,2012(17):169-170.ZHANG Ming-ming,LIU Dan-dan,YANG Tong-kang,et al.Study of hot galvanizing process and performance[J].China New Technologies and Products,2012(17):169-170.
• [9]Liu H,Li F,Shi W,et al.Challenges in hot-dip galvanizing of high strength dual phase steel:surface selective oxidation and mechanical property degradation[J].Surface and Coatings Technology,2012,206(16):3428-3436.
• [10]Lin K,Chu P,Lin C,et al.Galvanizing and galvannealing behavior of CMn Si Cr dual-phase steels[J].Metallurgical and Materials Transactions A,2013,44(6):2690-2698.
• [11]王辉,刘文艳,叶仲超,等.高铝600 MPa级冷轧双相钢的试验研究与分析[J].汽车工程,2009(5):423-425.WANG Hui-liu,WANG Wen-yan,YE Zhong-chao,et al.Research and analysis of high aluminum 600MPa cold rolled dual phase steel[J].Automotive Engineering,2009(5):423-425.

文章评论(Comment)：