孙跃军,高艳静,崔泽文,于慧,苗舒奕

• 1:辽宁工程技术大学材料科学与工程学院

摘要(Abstract)：

采用光学显微镜、扫描电镜、能谱分析以及定量金相法对液态模锻6061铝合金的微观组织以及固溶处理时第二相的变化规律进行了研究。结果表明:模锻态6061铝合金的微观组织呈树枝状分布,压力作用下晶粒没有产生明显变形。在固溶处理过程中,随着固溶温度的升高,第二相的溶解速率加快,残余第二相的面积逐渐减少。在一定的固溶温度下,残余第二相的面积与固溶时间呈指数型变化。根据企业生产的实际需要,液态模锻6061铝合金适宜的固溶工艺为560℃固溶处理5 h。

关键词(KeyWords)： 液态模锻;6061铝合金;固溶处理;第二相粒子

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 孙跃军,高艳静,崔泽文,于慧,苗舒奕

DOI: 10.13289/j.issn.1009-6264.2017-0424

参考文献(References)：

• [1]宋鑫,张会,周扬,等.液态模锻技术的应用现状[J].铸造技术,2012,33(6):715-717.SONG Xin,ZHANG Hui,ZHOU Yang,et al.Current state and development of the liquid forging technology[J].Foundry Technology,2012,33(6):715-717.
• [2]Su C W,Oon P H,Bai Y H,et al.Mechanical properties and microstructure of aluminum alloy al-6061 0btained by the liquid forging process[J].Materials Science Forum,2010,654-656:1420-1423.
• [3]杨文超,汪明朴,盛晓菲,等.轨道交通车辆用6005A合金板材时效析出及硬化行为研究[J].金属学报,2010,46(12):1481-1487.YANG Wen-chao,WANG Ming-pu,SHENG Xiao-fei,et al.Study of the aging precipitation and hardening behavior of 6005A alloy sheet for rall traffic vehicle[J].Acta Metallurgica Sinica,2010,46(12):1481-1487.
• [4]汪波,王晓姣,宋辉,等.Al-Mg-Si合金时效早期显微组织演变及其对强化的影响[J].金属学报,2014,50(6):685-690.WANG Bo,WANG Xiao-jiao,SONG Hui,et al.Strengthening effects of microstructure evolution during early ageing process in AlMg-Si alloy[J].Acta Metallurgica Sinica-Chinese Edition,2014,50(6):685-690.
• [5]Ozturk F,Sisman A,Toros S,et al.Influence of aging treatment on mechanical properties of 6061 aluminum alloy[J].Materials&Design,2010,31(2):972-975.
• [6]李慎兰,黄志其,蒋福利,等.固溶处理对Al-Mg-Si-Mn合金组织与性能的影响研究[J].稀有金属材料与工程,2012(s2):735-739.LI Shen-lan,HUANG Zhi-qi,JIANG Fu-li,et al.Effects of solution treatment on microstructure and properties of Al-Mg-Si-Mn alloy[J].Rare Metal Materials and Engineering,2012,41(9):735-739.
• [7]张静,杨亮,左汝林.固溶时效工艺对7055铝合金组织和力学性能的影响[J].稀有金属材料与工程,2015,44(4):956-960.ZHANG Jing,YANG Liang,ZUO Ru-lin.Effects of solution and aging treatments on the microstructures and mechanical properties of 7055 al alloys[J].Rare Metal Materials and Engineering,2015,44(4):956-960.
• [8]李润霞,李荣德,吕伟,等.固溶处理对铸造Al-Si-Cu-Mg合金组织与性能的影响[J].中国有色金属学报,2007,17(2):193-199.LI Run-xia,LI Rong-de,LWei,et al.Effects of solution heat treatment on microstructures and properties of Al-Si-Cu-Mg cast alloys[J].The Chinese Journal of Nonferrous Metals,2007,17(2):193-199.
• [9]李慎兰,黄志其,蒋福利,等.固溶温度对6061铝合金组织和性能的影响[J].材料热处理学报,2013,34(5):131-136.LI Shen-lan,HUANG Zhi-qi,JAING Fu-li,et al.Effect of solution temperature on microstructure and property of a 6061 aluminum alloy[J].Transactions of Materials and Heat Treatment,2013,34(5):131-136.
• [10]张德芬,谭盖,刘璐,等.热处理对6061铝合金组织与性能的影响[J].金属热处理,2015,40(11):184-187.ZAHNG De-fen,TAN Gai,LIU Lu,et al.Effect of heat treatment on microstructure and mechanical properties of 6061 aluminum alloy[J].Heat Treatment of Metals,2015,40(11):184-187.
• [11]杜鹏,闫晓东,李彦利,等.6061铝合金中富铁相在均匀化过程中的相变机理[J].中国有色金属学报,2011,21(5):981-987.DU Peng,YAN Xiao-dong,LI Yan-li,et al.Transformation mechanism of iron-rich phase in 6061 aluminum alloy during homogenization[J].The Chinese Journal of Nonferrous Metals,2011,21(5):981-987.

文章评论(Comment)：