程秀,胡树兵,宋武林,黄齐文,王海群,章硕,李振

• 1:华中科技大学材料成形与模具技术国家重点实验室

摘要(Abstract)：

利用优化的等离子束工艺参数对无限冷激铸铁表面进行合金化强化处理,并经650℃高温回火处理,获得高硬度、耐磨的合金化层组织。利用扫描电镜(SEM)、X射线衍射仪(XRD)、显微硬度计对等离子束合金化层进行分析,并对摩擦磨损性能进行了分析。试验结果表明,合金化层与基体之间实现了冶金结合,并形成了以莱氏体、马氏体、碳化物为主的显微组织,合金化层的细晶强化和回火弥散析出强化等强化作用,使显微硬度高达1200 HV0.2,合金化加回火处理后的耐磨性相对于基体提高了大约2倍。

关键词(KeyWords)： 等离子束表面合金化;回火处理;显微组织;显微硬度;耐磨性

Abstract:

Keywords:

基金项目(Foundation): 2010年省部产学研合作重大项目(2010090200047)

作者(Author): 程秀,胡树兵,宋武林,黄齐文,王海群,章硕,李振

DOI: 10.13289/j.issn.1009-6264.2012.s1.022

参考文献(References)：

• [1]许巧玉,于青,李铸刚,等.70Mn2Mo铸钢热轧辊的激光表面强化[J].金属热处理,2002,27(8):32-34.XU Qiao-yu,YU Qing,LI Zhu-gang,et al.Surface hardening of 70Mn2Mo cast steel hot roller by laser[J].Heat Treatment of Metals,2002,27(8):32-34.
• [2]李美艳,王勇,韩彬,等.高铬钢激光熔凝处理后的组织与耐蚀性能[J].材料保护,2010,43(5):61-64.LI Mei-yan,WANG Yong,HAN Bin.Microstructure and corrosion resistance of laser surface melting modified layer on high chrome steel[J].MaterialProtection,2010,43(5):61-64.
• [3]孙桂芳,刘常升,陶兴启,等.高镍铬无限冷硬铸铁轧辊表面激光合金化的研究[J].东北大学学报,2008,29(6):845-848.SUN G F,LIU C S,TAO X Q,etc.Research on laser alloying of high-Ni-Cr infinite chilled cast iron roller[J].Journal of Northeastern University(Natural Science),2008,29(6):845-848.
• [4]欧阳安,黄安国,王长贵等.高镍铬铸铁轧辊材料激光相变组织与耐磨性研究[J].电焊机,2007,37(8):45-49.OU Y A,HUANG A G,WANG C G et al.Study on laser phase transformation hardening of high-Ni-Cr cast iron[J].Electric Welding Machine,2007,37(8):45-49.
• [5]CHEN Hao,LI Hui-qi.Microstructure and wear resistance of Fe-based coatings by plasma jet surface metallurgy[J].Materials letters,2006,60(11):1311-1314.
• [6]PAN W X,MENG X,LI G,et al.Feasibility of laminar plasma-jet hardening of cast iron surface[J].Surface&Coatings Technology,2005,197(2-3):345-350.
• [7]GAO Yuan,GAO Qing,XU Jin-yong,et al.Morphology and composition of plasma alloying of Cr–Mo layer[J].Surface&Coatings Technology,2007,201(9-11):5526-5528.
• [8]HE Zhi-yong,ZHAO Jin-xiang,XU Zhong.Plasma surface alloying of spheroidal graphite iron[J].Surface and Coatings Technology,2000,131(1-3):574-578.
• [9]赵剑波,崔洪芝,孙海洋,等.模具表面等离子处理的研究[J].模具制造.2005,1(5):49-51.ZHAO Jian-bo,CUI Hong-zhi,SUN Hai-yang,et al.The research of plasma disposal on die&mold surface[J].Die&Mould Manufacture,2005,1(5):49-51.
• [10]王文焱,徐晶,谢敬佩,等.TiC含量对激光合金化层组织和耐磨性的影响[J].金属热处理,2010,35(5):34-38.WANG Wen-yan,XU Jing,XIE Jing-pei,et al.Effect of TiC content on microstructure and wear resistance of laser alloyed coatings[J].HeatTreatment of Metals,2010,35(5):34-38.
• [11]Bourithis L,Papadimitriou G D.Synthesizing a class“M”high speed steel on the surface of a plain steel using the plasma transferred arc(PTA)alloying technique:microstructure and wear properties[J].Materials Science and Engineering A,2003,361(1-2):165–172.
• [12]Piekoszewskia J,Gr¨otzschelb R,Wieser E,et al.Kinetics of the pulsed erosion deposition process induced by high intensity plasma beams[J].Surface and Coatings Technology,2000:128-129,394-399.
• [13]迟宏宵,马党参,王昌,等.Cr8Mo2SiV钢二次硬化机理的研究[J].金属学报,2010,46(10):1181-1185.CHI Hong-xiao,MA Dang-can,Wang Chang,et al.Study on secondary hardening mechanism of Cr8Mo2SiV steel[J].Aata Metallurgical Sinica,2010,46(10):1181-1185.
• [14]CHEN J,LI X Y,Bell T,et al.Improving the wear properties of Stellite 21 alloy by plasma surface alloying with carbon and nitrogen[J].Wear,2008,264(3-4):157–165.
• [15]李美艳,王勇,韩彬,等.热处理中高铬钢激光熔凝层的组织转变[J].材料热处理学报,2011,32(1):106-108.LI Meiyan,WANG Yong,HAN Bin,et al.Effect of heat treatment on microstructure of high chrome steel by laser surface melting[J].Transactions ofMaterials and Heat Treatment,2011,32(1):106-108.

文章评论(Comment)：