杨丽颖,杨立清,庞艳荣,王芳,董小平

• 1:河北大学质量技术监督学院
• 2:内蒙古科技大学信息工程学院

摘要(Abstract)：

采用80S-G低合金钢焊丝焊接C4镍基合金/X60低合金钢异种金属。利用扫描电镜观察C4镍基合金母材/80S-G焊缝之间熔合区微观组织,能谱分析该区元素分布。结果表明,C4镍基合金母材稀释进入80S-G低合金钢焊缝内,致使Ni、Cr、Mo元素质量分数从部分熔化区到过渡区缓慢降低,Fe元素质量分数增加。微观组织从单相奥氏体组织逐渐转化为奥氏体与铁素体组成的混合组织,在此区域中弥散分布少量析出相粒子。

关键词(KeyWords)： 异种金属焊接;微观组织;元素分布;熔合区

Abstract:

Keywords:

基金项目(Foundation): 河北省自然科学基金(E2010000301);; 河北大学自然科学研究计划项目(2009-153);; 河北大学大学生科技创新项目(2011073);; 河北省高等学校科学研究计划项目(Z2012168);; 保定市科学计划研究与发展指导计划项目(12ZG018)

作者(Author): 杨丽颖,杨立清,庞艳荣,王芳,董小平

DOI: 10.13289/j.issn.1009-6264.2013.02.015

参考文献(References)：

• [1]Dupont J N,Kusko C S.Technical note:martensite formation in austenitic/ferritic dissimilar alloy welds[J].Welding Journal,2007,86(2):51s-54s.
• [2]Ahmed H E.Characterization of the GTAW fusion line phases for superferritic stainless steel weldments[J].Journal of Materials ProcessingTechnology,2001,118(2):128-132.
• [3]杨丽颖,柳伟,董小平.ECrNiMo-3焊接X60钢部分熔化区组织及腐蚀行为[J].金属热处理,2008,33(4):84-87.YANG Li-ying,LIU Wei,DONG Xiao-ping.Microstructure and corrosion behavior in partially melted zone of X60 steel welded by ECrNiMo-3electrode wire[J].Heat Treatment of Metals,2008,33(4):84-87.
• [4]Leonard R B.Thermal stability of Hastelloy alloy C-276[J].Corrosion,1967,25(5):222-228.
• [5]Raghavan M,Berkowitz B J,Sanlon J C.Electron microscopic analysis of heterogeneous precipitates in Hastetloy C-276[J].Metallurgical andMaterials Transactions A,1982,13(6):979-984.
• [6]Ogborn J S,Olson D L,Cieslak M J.Influence of solidification on the microstructural evolution of nickel base weld metal[J].Material Science andEngineering A,1995,203(1):134-139.
• [7]Dupont J N.Microstructural development and solidification cracking susceptibility of a stabilized stainless steel[J].Welding Journal,1999,78(7):253s-263s.
• [8]黄安国,余圣甫,谢明立,等.低合金钢焊缝的针状铁素体微观组织[J].焊接学报,2008,29(3):45-48.HUANG An-guo,YU Sheng-pu,XIE Ming-li,et al.Acicular ferrite microstructure of weld metal for low-alloy steel[J].Transactions of the chinaWelding Institution,2008,29(3):45-48.
• [9]PavlovskJ,Million B,Cíha K,StránskK.Carbon redistribution between an austenitic cladding and a ferritic steel for pressure vessels of a nuclearreactor[J].Materials Science and Engineering A,1991,149(1):105-110.
• [10]Sedat K.The effect of the welding temperature on the weldability in diffusion welding of martensitic(AISI 420)stainless steel with ductile(spheroidal graphite-nodular)cast iron[J].Journal of Materials Processing Technology,2007,186(1):33-36.
• [11]由伟,方鸿生,白秉哲.用反向传播人工神经网络预测低碳低合金钢的马氏体转变开始温度[J].金属学报,2003,39(6):630-634YOU Wei,FANG Hong-sheng,BAI Bing-zhe.Predicting the martensitic transformation start temperature using back-propagation artificial neuralnetworks[J].Acta Metallurgica Sinica,2003,39(6):630-634
• [12]Ul-Hamid A,Hani M T.Failure of weld joints between carbon steel pipe and 304 stainless steel elbows[J].Engineering Failure Analysis,2005,12(2):181-191.

文章评论(Comment)：