丁海民,范孝良,王进峰,李春燕,王小磊

• 1:华北电力大学能源动力与机械工程学院

摘要(Abstract)：

研究了热轧不锈钢-碳钢复合界面的组织形貌、成分、硬度变化及结构特征。结果表明热轧复合碳钢—不锈钢复合板的复合界面两侧存在一定厚度的扩散层。由于元素扩散及碳化物的生成,复合界面附近硬度升高。对于基层碳钢,靠近界面处显微硬度值最高,而对于复层不锈钢,在距界面处一定距离,显微硬度达到最高值。复合界面剥离后呈现等轴韧窝形貌,表明通过热轧复合的方法,不锈钢和碳钢之间能够实现良好的复合。

关键词(KeyWords)： 复合板;热轧复合;碳钢;不锈钢

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51071097);; 中央高校基本科研业务费(11QG67,11QG68)

作者(Author): 丁海民,范孝良,王进峰,李春燕,王小磊

DOI: 10.13289/j.issn.1009-6264.2011.11.004

参考文献(References)：

• [1]祖国胤,于九明,温景林.中间夹层对不锈钢复合板界面结合性能的影响[J].东北大学学报:自然科学版,2003,24(11):1053-1056.ZU Guoyin,YU Jiuming,WEN Jinglin.Effect of interlayer on interfacial bonding properties of stainless clad sheets[J].Journal of NortheasternUniversity:Nature Science,2003,24(11):1053-1056.
• [2]王立新,李国平.爆破不锈钢复合板界面组织和性能分析及应用[J].钢铁,2005,40(11):71-74.WANG Lixin,LI Guoping.Interface structure,performance analysis and application of exploded stainless and carbon steel clad plates[J].Steel,2005,40(11):71-74.
• [3]韩丽青,王自东,林国标,等.爆炸复合TA2/316L板的组织和性能研究[J].材料热处理学报,2008,29(1):107-110.HAN Liqing,WANG Zidong,LIN Guodong,et al.Investigation on microstructure and property of TA2/316L composite plate prepared by explosivewelding[J].Transactions of Materials and Heat Treatment,2008,29(1):107-110.
• [4]郑远谋,张胜军.不锈钢-碳钢大厚度复合板坯的爆炸焊接和轧制[J].钢铁研究学报,1996,8(4):14-19.ZHENG Yuanmou,ZHANG Shengjun.Explosive welding and rolling of large and thick stainless steel-carbon steel composite slab[J].Journal of Ironand Steel Research,1996,8(4):14-19.
• [5]于九明,孝云桢,王群骄.金属层状复合技术及其新进展[J].材料研究学报,2000,14(1):12-16.YU Jiuming,XIAO Yunzhen,WANG Qunjiao.New development of technology of clad metal[J].Chinese Journal of Material Research,2000,14(1):12-16.
• [6]李炎,祝要民.316/16MnR热轧复合板界面组织结构的研究[J].金属学报,1995,31(12):537-542.LI Yan,ZHU Yaomin.Interfacial microstructures of hot-rolled 316/16MnR composite plate[J].Acta Metallurgica Sinica,1995,31(12):537-542.
• [7]Tsuji N,Toyoda T,Minamino Y,et al.Microstructural change of ultrafine-grained aluminum during high speed plastic deformation[J].MaterialScience and Engineering,2003,(5):108-116.
• [8]Peng X K,Heness G,Yeung W Y.Effect of roll temperature on interface and bond strength development of roll bonded copper/aluminummetallaminates[J].Journal of Material Science,1999,34(2):277-281.
• [9]林大超,赵静远.金属高温成形的粘滞流体描述[J].应用力学学报,1990,7(4):72-76.LIN Dachao,ZHAO Jingyuan.Fluid viscous description of the formation of metals at high temperature[J].Chinese Journal of Applied Mechanics,1990,7(4):72-76.

文章评论(Comment)：