沈显璞,雷廷权

• 1:哈尔滨工业大学

摘要(Abstract)：

<正> 4.合金元素的作用合金元素在双相钢中的作用主要表现在对马氏体分布状态,淬透性及铁素体性质的影响上。(1)合金元素对马氏体形态及分布的影响目前这方面的报导还很少。Thomas等选用表6所示的合金成分,采用马氏体为原始组织,然后经亚温淬火(820℃),获得不同组织状态的双相钢。

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 沈显璞,雷廷权

参考文献(References)：

• [1] J. Koo and G. Thomas, Metal Progress, 116, (1979) , 4, 66
• [2] M.S. Rashid, SAE Preprint, 760206, 1976, Feb
• [3] J.Morrow and G. Tither, J. Metals, 30, (1978) , 5, 16．
• [4] A.P. Colclren and G. Tither, J. Metals 30, (1978) , 4, 6
• [5] R.G. Davies, Met. Trans 9A(1978) 1, 41
• [6] 国重和俊等,铁と钢,6,(1979) ,13,92
• [7] J.H. Bucher and E. G. Hamburg, SAE, Preprint 1977, Feb.
• [8] P.E. Rapas, SAE. Preprint, 790008, 1979, Feb.
• [9] 大桥,桥口,高桥,塑性と加工,17,(1976) ,P.190．
• [10] A.E. Cornford et. al, SAE. Preprint, 790007, 1979, Feb.
• [11] 武智弘等,铁と钢,63,(1977) ,S 861．
• [12] 古川等,铁と钢,64,(1978) ,S 265．
• [13] 细谷佳弘等,铁と钢,64,(1978) ,S 759．
• [14] B. Poollard et. al, SAE. Preprint, 790006．
• [15] P.H. Thornton, Met. Trans, 10A, (1979) , P. 1179．
• [16] 石川等,铁と钢,64,(1978) ,S.773．
• [17] 高桥政司,铁と钢,64,(1978) ,S 737．
• [18] W.H. Mcfarland, US Patent, №. 3378360, 1968．
• [19] S. Hayami and T. Furukawa, Microalloying 75, V.1, 78, 1977, New York, Union Carbide corp.
• [20] 武智弘等,铁と钢,64,(1978) ,S 741．
• [21] R.G. Davies and C. L. Magee, J. Metals, 30, (1979) , 11, P. 17．
• [22] J.F. Butler and J. H. Bucher, Iron and Steel International, 52, (1979) , 2, P. 85．
• [23] W.S. Owen, Metals Technology, 1980, Jan, P. 1．
• [24] J.W. Morrow et. al, Climax Molybdenum CO., Reports L-176-165, L-176-166, 1976．
• [25] D. J. Bailey and R. Stevenson, Met. Trans, 10A, (1979) , P. 47．
• [26] R. Lawson et. al. , Metallography13: 263-87, 1980, P. 71．
• [27] F.S. Lepera, Metallography, 12:263-268, 12 (1979) , P. 203．
• [28] D. Aichbhaumik et. al., Effect of Annealing Cyles on the Properties and Microstructure of Dualphase Steel, SAE. Technical Paper №. 790010(1979) .
• [29] H. K.D.H. Bhadeshid et. al., Metal Science 14, (1980) , 2, P. 1．
• [30] 武智弘,塑性と加工,21,(1980) ,229,P.109．
• [31] R.G. Davies, Met. Trans. 9A, (1978) , 5, P. 671．
• [32] J. Y. Koo and G. Thomas, Materials Science and Engneering, 24, (1976) , P. 187．
• [33] A.P. Coldren et. al. Development and Mill Trial of AS Rolled Dual-Phase Steel Report L-176-181, Climax Molybdenum CO., Ann Arbor Mich. , 1978．
• [34] T. Furukawa et. al., Process Factors for Highly Ductile Dual-Phase Sheet Steel, Report from Research Laboratories, Nippon Steel Corp., Kawasaki Japan.
• [35] R.G. Davies, Met. Trans., 9A, (1978) 3, P. 451．
• [36] R.G. Davies, Met. Trans., 10A, (1979) , 10, P. 1549．
• [37] 冯端等,金属物理,科学出版社1975,下册,P.726．
• [38] L. Ramos et. al. , Met. Trans. , 10A, (1979) , 2, P. 259．
• [39] 中川吉左卫朋等,塑性と加工,121,(1980) ,229． P.118．
• [40] R.W. Landgraf, ASTM., STP467． American Society for Testing and Materials, Philadelphia 1970．
• [41] 武智弘等,铁と钢,65,(1979) ,4,S 310．
• [42] 岸田宏司等,铁と钢,65,(1979) ,11,S 858．
• [43] 渡边国男等,铁と钢,65,(1979) ,11,S 859．
• [44] 森川博文等,铁と钢,64,(1978) ,11,S 740．
• [45] G.E. Dieten, Mechanical Metallurgy, Mcgraw-Hill 1961, P.248．
• [46] A.M. Sherman and R. G. Davies, Met. Trans., 10A, (1979) , 7, P. 929．
• [47] J..C. Benedyk and J. A. Newnham, J. Inst.of Metals 98, (1970) P. 97．
• [48] 冲幸男等,日本金属学会志44,(1980) ,3,P.239．
• [49] 桥口耕一等,铁と钢,65,(1979) ,4,S311．
• [50] 大村雅纪等,铁と钢,65,(1979) 4,S313．
• [51] 渡边国男等,铁と钢,65,(1979) 11,S860．
• [52] 高桥政司等,铁と钢,65,(1979) ,11,S861．
• [53] 高桥政司等,铁と钢,65,(1979) 4,S314．
• [54] 须藤正俊等,铁と钢,65,(1979) 11,S 864．
• [55] 增井沽昭等,铁と钢,60,(1974) ,2． P.284．
• [56] 桥口耕一等,铁と钢,64,(1978) ,3,S257．
• [57] W. B. Morrison, Trans. ASM, 59, (1966) , P. 824．
• [58] S. Hayami et. al. ,Recent Developments in Formable Hot and Cold Rolled HSLA Including Dual-Phase Steel Sheet, Report from Research Laboratories, Nippon Steel Corp., Kawasaki,Japan.
• [59] D.K. Matlock et. al., Symposium on Structure and Properties of Highly Formable Dual-Phase HSLA Steels, AIME, New Orleans, 1979．
• [60] G.R. Speich et. al. , Mechanical Propreties of Martensite-Ferrite Steels, Report from United States Steel Corp., Research Laboratory, 1979．
• [61] M.F. Ashby, Philos. Mag., 14, (1966) , P. 1157．
• [62] G.Tither et. al., Proc. 20 th Mechanical Working Conf., Chicago, ILL., 1978．
• [63] J.W. Morrow et. al. , J. Met. , 30(1978) , 12, P. 20．
• [64] D.L. Mcdanels et. al. , Trans. AIME, 233, (1965) , P. 636．
• [65] M.R. Plichta and H.I. Aaronson, Met. Trans, 5, (1974) , P. 2611．
• [66] 田村今男等,铁と钢,59,(1973) ,3,P.454
• [67] J.Y. Koo and G. Thomas, Met. Trans, 8A(1977) , P. 525．
• [68] R. Lagneborg, Structure-Property Relationship in Dual-Phase Steels, Report of Institut f(u|¨)r Metall Forshung, September. 1978．
• [69] 加藤俊之等,铁と钢65(1979) ,11,S857．
• [70] 岸田宏司等,铁と钢,65,(1979) ,11,S858．
• [71] 须藤正俊等,铁と钢,65,(1979) ,11,S863．
• [72] 古川等,铁と钢,65,(1979) ,4,S309．
• [73] A. Kelly and G. J. Davies, Met. Rev. , 10, (1965) , P. 10．
• [74] G. Garmong and R. B. Thompson, Met. Trans, 4, (1973) P. 863
• [75] A. Kelly, Strong Solids, 2nd ed. , P. 157, oxford university Press, 1973．
• [76] K. Araki et. al., Trans. Iron Steel Inst. , Jpn. , 1977, V. 17． P. 710．
• [77] B. Jaoult, J. Mech. Phys. Solids, 5, (1957) , P. 95．
• [78] W.C. Leslie and R. J. Sober, Trans. ASM, 60, (1967) , P. 459．
• [79] C. L. Magee and R.G. Davies, Acta Met. , 19(1971) P. 345．
• [80] J.Y. Koo et. al. ,Met. Trans, 10A, (1980) , P. 351．
• [81] S.T. Mileiko, J. Mater. Sci. , 4, (1976) , P. 974．
• [82] M.S. Rashid, SAE. Preprint, 770211, 1977．
• [83] M.S. Rashid, US. Patent, Appl.№.642457, 1976．
• [84] R.G. Davies, Met. Trans, 10A, (1979) , 1, P. 113．
• [85] C. Crussard, Rev. Metall, (Paris), 10, (1953) , P. 697．
• [86] 美马,堀,日本金属学会志,16,(1952) ,P.362．
• [87] 国尾日本机械学会讲演论文集,№710-1,(1971) ,P.158．
• [88] I. Tamura et. al, The Microstructure and Design of Alloys, Proceeding of the 3rd International Conference on the Strength of Metals and Alloys, 1, (1977) , P. 611．
• [89] 增山,日本材料,15,(1966) ,1,P.17．
• [90] 友田阳等,铁と钢,61,(1975) ,1,P.107．
• [91] H. Fischmeiter et. al, The Microstructure and Design of Alloys, Proceeding of the Metals and Alloys, 1, (1977) , P. 611
• [92] M.S. Rashid, Met. Trans., 7A, P. 497．

文章评论(Comment)：