刘瑞良,闫牧夫,乔英杰

• 1:哈尔滨工程大学超轻材料与表面技术教育部重点实验室材料科学与化学工程学院
• 2:哈尔滨工业大学金属精密热加工国家级重点实验室材料科学与工程学院

摘要(Abstract)：

综述了不锈钢表面低温热扩渗层制备技术及其腐蚀行为的研究方法,分析了不锈钢表面低温热扩渗层制备及其腐蚀行为研究的现状及存在的问题。结果表明:与大量的力学性能研究相比,对不锈钢(特别是马氏体不锈钢)表面低温热扩渗层(如低温渗氮、渗碳和氮碳共渗等)腐蚀行为的研究相对较少,采用的主要研究方法是常规的极化曲线和电化学阻抗谱等方法。随着低温热扩渗技术在不锈钢表面改性上的成功应用及其应用领域的扩展,借助腐蚀领域中新的理论和研究方法,研究不锈钢表面低温热扩渗层的腐蚀行为,准确揭示渗层腐蚀机制,已经势在必行。

关键词(KeyWords)： 不锈钢;低温热扩渗;制备;耐蚀性

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51371070,51401062);; 高等学校博士学科点专项科研基金(20122304120038)

作者(Author): 刘瑞良,闫牧夫,乔英杰

DOI: 10.13289/j.issn.1009-6264.2016.06.001

参考文献(References)：

• [1]Lo K H,Shek C H,Lai J K L.Recent developments in stainless steels[J].Materials Science Engineering Report,2009,65(4/6):39-104.
• [2]徐哲.舰船燃机压气机叶片防护涂层制备及其耐蚀耐磨性能研究[D].哈尔滨:哈尔滨工程大学,2006.XU Zhe.The coating preparation of turbine compressor vane in the ship and the research of anti-corrosion and wear-resistant properties[D].Harbin:Harbin Engineering University,2006.
• [3]孙希泰,徐英,孙毅.21世纪化学热处理将由其它能助扩渗代替纯热扩渗[J].金属热处理,2003,28(1):27-29.SUN Xi-tai,XU Ying,SUN Yi.Thermo-chemical treatment with pure heat diffusion penetration will be replaced by other types of energy aided diffusion penetration in the 21st Century[J].Heat Treatment of Metals,2003,28(1):27-29.
• [4]Ozbaysal K,Inal O T.Structure and properties of ion-nitrided stainless steels[J].Journal of Materials Science,1986,21:4318-4326.
• [5]Suh B S,Lee W J.Surface hardening of AISI 316L stainless steel using plasma carburizing[J].Thin Solid Films,1997,295(1/2):185-192.
• [6]Pantazopoulosa G,Papazoglou T,Psyllaki P,et al.Sliding wear behaviour of a liquid nitrocarburised precipitation-hardening(PH)stainless steel[J].Surface and Coatings Technology,2004,187(1):77-85.
• [7]Christiansen T,Somers M A J.Low temperature gaseous nitriding and carburising of stainless steel[J].Surface Engineering,2005,21(5/6):445-455.
• [8]Zhang Z L,Bell T.Structure and corrosion resistance of plasma nitrided stainless steel[J]Surface Engineering,1985,1(2):131-136.
• [9]Mingolo N,Tschiptschin A P,Pinedo C E.On the formation of expanded austenite during plasma nitriding of an AISI 316L austenitic stainless steel[J].Surface and Coatings Technology,2006,201(7):4215-4218.
• [10]Bell T,Sun Y.Process for the treatment of austenitic stainless steel articles.UK.9715180.7[P],1997.
• [11]Marcher K,Cooper C V,Blucher J T,et al.Observation of a compound layer with very low friction coefficient in ion-nitrided martensitic 410 stainless steel[J].Surface and Coatings Technology,1998,99(3):229-233.
• [12]Yan M F,Liu R L,Wu D L.Improving the mechanical properties of 17-4PH stainless steel by low temperature plasma surface treatment[J].Materials and Design,2010,31(4):2270-2273.
• [13]刘瑞良,闫牧夫,乔英杰.马氏体不锈钢低温表面改性技术研究进展[J].金属热处理,2012,37(9):1-7.LIU Rui-liang,YAN Mu-fu,QIAO Ying-jie.Techniques and research progress of low temperature modification for martensitic stainless steels[J].Heat Treatment of Metals,2012,37(9):1-7.
• [14]Kliauga A M,Pohl M.Effect of plasma nitriding on wear and pitting corrosion resistance of X2 Cr Ni Mo N 22 5 3 duplex stainless steel[J].Surface and Coatings Technology,1998,98(1/3):1205-1210.
• [15]Kochmański P,Nowacki J.Influence of initial heat treatment of 17-4 PH stainless steel on gas nitriding kinetics[J].Surface and Coatings Technology,2008,202(19):4834-4838.
• [16]罗伟,王均,闫静,等.304奥氏体不锈钢低温盐浴渗氮处理[J].材料热处理学报,2012,33(10):107-110.LUO Wei,WANG Jun,YAN Jin,et al.Low temperature salt bath nitriding of 304 austenitic stainless steel[J].Transactions of Materials and Heat Treatment,2012,33(10):107-110.
• [17]Wang J,Lin Y H,Yan J,et al.Influence of time on the microstructure of AISI 321 austenitic stainless steel in salt bath nitriding[J].Surface and Coatings Technology,2012,206(15):3399-3404.
• [18]Leyland A,Lewis D B,Stevenson P R,et al.Low temperature plasma diffusion treatment of stainless steels for improved wear resistance[J].Surface and Coatings Technology,1993,62(1/3):608-617.
• [19]Williams P C,Marx S V.Low temperature case hardening processes.United States.6 093 303[P],2000.
• [20]Cao Y,Ernst F,Michal G M.Colossal carbon supersaturation in austenitic stainless steels carburized at low temperature[J].Acta Materials,2003,51(14):4171-4181.
• [21]Liu J,Dong H,Buhagiar J,et al.Effect of low-temperature plasma carbonitriding on the fretting behaviour of 316LVM medical grade austenitic stainless steels[J].Wear,2011,271(9/10):1490-1496.
• [22]Anjos A D,Scheuer C J,Brunatto S F,et al.Low-temperature plasma nitrocarburizing of the AISI 420 martensitic stainless steel:Microstructure and process kinetics[J].Surface and Coatings Technology,2015,275:51-57.
• [23]Sun Y.Hybrid plasma surface alloying of austenitic stainless steels with nitrogen and carbon[J].Materials Science and Engineering A,2005,404:124-129.
• [24]Yan M F,Liu R L,Wu D L.Improving the mechanical properties of 17-4PH stainless steel by low temperature plasma surface treatment[J].Materials and Design,2010,31(4):2270-2273.
• [25]Liu R L,Yan M F.The microstructure and properties of 17-4PH martensitic precipitation hardening stainless steel modified by plasma nitrocarburizing[J].Surface and Coatings Technology,2010,204(14):2251-2256.
• [26]Liu R L,Yan M F.Improvement of wear and corrosion resistances of 17-4PH stainless steel by plasma nitrocarburizing[J].Materials and Design,2010,31(5):2355-2359.
• [27]Luo H S,Zhao C.Low temperature salt bath hardening of AISI 201 austenitic stainless steel[J].Physics Procedia,2013,50:38-42.
• [28]Huang R B,Wang J,Zhong S,et al.Surface modification of 2205 duplex stainless steel by low temperature salt bath nitrocarburizing at 430℃[J].Applied Surface Science,2013,271:93-97.
• [29]Tsujikawa M,Yamauchi N,Ueda N,et al.Behavior of carbon in low temperature plasma nitriding layer of austenitic stainless steel[J].Surface and Coatings Technology,2005,193(1/3):309-313.
• [30]Tsujikawa M,Yoshida D,Yamauchi N,et al.Surface modification of SUS304 stainless steel using carbon push-ahead Effect by low temperature plasma nitriding[J].Materials Transactions,2005,46(4):863-868.
• [31]Tsujikawa M,Yoshida T D,Yamauchi N,et al.Surface material design of 316 stainless steel by combination of low temperature carburizing and nitriding[J].Surface and Coatings Technology,2005,200(1/4):507-511.
• [32]Conrad J R,Radtke J L,Dodd R A.Plasma source ion-implantation technique for surface modification of materials[J].Journal of Applied Physics,1987,62(11):4591-4596.
• [33]雷明凯,朱雪梅,袁力江,等.奥氏体不锈钢表面改性层耐蚀性实验研究.I.孔蚀和均匀腐蚀性能[J].金属学报,1999,35(10):1081-1084.LEI Minq-kai,ZHU Xue-mei,YUAN Li-jiang,et al.Corrosion resistance of modified surface layer on austenitic stainless steel:I.Pitting corrosion and general corrosion properties[J].Acta Metallurgical Sinica,1999,35(10):1081-1084.
• [34]Samandi M,Shedden B A,Smith D I.Microstructure,corrosion and tribological behaviour of plasma immersion ion-implanted austenitic stainless steel[J].Surface and Coatings Technology,1993,59(1/3):261-266.
• [35]Manova D,Mndl S,Neumann H.Wear behaviour of martensitic stainless steel after PIII surface treatment[J].Surface and Coatings Technology,2005,200(1/4):137-140.
• [36]Williamson D L,ztürk O,Wei R.Metastable phase formation and enhanced diffusion in f.c.c.alloys under high dose,high flux nitrogen implantation at high and low ion energies[J].Surface and Coatings Technology,1994,65(1/3):15-23.
• [37]ztürk O,Williamson D L.Thermal stability of the high-N solid-solution layer on stainless steel[J].Surface and Coatings Technology,2002,158/159:288-294.
• [38]Chen J,Conrad J R,Dodd R A.Methane plasma source ion implantation(PSII)for improvement of tribological and corrosion properties[J].Journal of Materials Processing Technology,1995,49(1/2):115-124.
• [39]Baba K,Hatada R.Formation of amorphous carbon thin films by plasma source ion implantation[J].Surface and Coatings Technology,1998,103/104:235-239.
• [40]Shum P W,Zhou Z F,Li K Y.Tribological performance of amorphous carbon films prepared on steel substrates with carbon implantation pre-treatment[J].Wear,2004,256(3/4):362-373.
• [41]Blawert C,Kalvelagea H,Mordikea B L.Nitrogen and carbon expanded austenite produced by PI3[J].Surface and Coatings Technology,2001,136(1/3):181-187.
• [42]Abd El-Rahman A M,El-Hossary F M,Negm N Z.Influence of gas pressure and substrate temperature on PIII nitrocarburizing process of AISI 304stainless steel[J].Nuclear Instruments and Methods in Physics Research Section B-Beam Interactions with Materials and Atoms,2004,226(4):499-506.
• [43]Li C X,Bell T.Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steel[J].Wear,2004,256(11/12):1144-1152.
• [44]Li C X.Active screen plasma nitriding-an overview[J].Surface Engineering,2010,26(1/2):135-141.
• [45]de Sousa R R M,de Araujo F O,Ribeiro K J B,et al.Ionic nitriding in cathodic cage of AISI 420 martensitic stainless steel[J].Surface Engineering,2008,24(1):52-56.
• [46]Wu K,Liu G Q,Wang L,et al.Research on new rapid and deep plasma nitriding techniques of AISI 420 martensitic stainless steel[J].Vacuum,2010,84(6):870-875.
• [47]Liu R L,Qiao Y J,Yan M F,et al.Effects of rare earth elements on the characteristics of low temperature plasma nitrocarburized martensitic stainless steel[J].Journal of Materials Science Technology,2012,28(11):1046-1052.
• [48]Liu R L,Qiao Y J,Yan M F,et al.Layer growth kinetics and wear resistance of martensitic precipitation hardening stainless steel plasma nitrocarburized at 460℃with rare earth addition[J].Metal Materials International,2013,19(5):1151-1157.
• [49]刘瑞良.17-4PH不锈钢等离子体稀土氮碳共渗层组织结构与性能表征[D].哈尔滨:哈尔滨工业大学,2010.LIU Rui-liang.Characterization of microstructure and properties of surface layer of 17-4PH stainless steel plasma nitrocarburized with rare earths addition[D].Harbin:Harbin Institute of Technology,2010.
• [50]Fattah-alhosseini A,Soltani F,Shirsalimi F,et al.The semiconducting properties of passive films formed on AISI 316 L and AISI 321 stainless steels:A test of the point defect model(PDM)[J].Corrosion Science,2011,53(10):3186-3192.
• [51]李瑛,屈力,王福会,等.Ti N涂层电化学腐蚀行为研究Ⅰ.Ti N涂层的保护性能与失效机制[J].中国腐蚀与防护学报,2003,23(2):65-69.LI Ying,QU Li,WANG Fu-hui,et al.Study on the electrochemical corrosion behavior of Ti N coating in acid and salt solutionⅠ.The corrosion resistance and failure mechanism of Ti N coating in acid and salt solution[J].Journal of Chinese Society For Corrosion and Protection,2003,23(2):65-69.
• [52]Zanda R Z,Verbekenb K,Adriaens A.The corrosion resistance of 316L stainless steel coated with a silane hybrid nanocomposite coating[J].Progress in Organic Coatings,2011,72(4):709-715.
• [53]Xu L,Zuo Y,Tang J L,et al.Chromium-palladium films on 316L stainless steel by pulse electrodeposition and their corrosion resistance in hot sulfuric acid solutions[J].Corrosion Science,2011,53(11):3788-3795.
• [54]孙跃,胡津.金属腐蚀与控制[M].哈尔滨:哈尔滨工业大学出版社,2003.
• [55]Sun Y.Corrosion behaviour of low temperature plasma carburised 316L stainless steel in chloride containing solutions[J].Corrosion Science,2010,52:2661-2670.
• [56]曹楚南,张鉴清.电化学阻抗谱导论[M].北京:科学出版社,2002.
• [57]Sun Y.Depth-profiling electrochemical measurements of low temperature plasma carburised 316L stainless steel in 1 M H2SO4solution[J].Surface and Coatings Technology,2010,204(16/17):2789-2796.
• [58]Sun Y,Rana V.Tribocorrosion behaviour of AISI 304 stainless steel in 0.5 M Na Cl solution[J].Materials Chemistry and Physics,2011,129(1/2):138-147.
• [59]Sun Y,Haruman E.Effect of electrochemical potential on tribocorrosion behavior of low temperature plasma carburized 316L stainless steel in 1 M H2SO4solution[J].Surface and Coatings Technology,2011,205(17/18):4280-4290.
• [60]Sun Y.Tribocorrosion behavior of low temperature plasma carburized stainless steel[J].Surface and Coatings Technology,2013,228(S1):S342-S348.

文章评论(Comment)：