王炳英,孙振铜,蒋文春,侯振波

• 1:中国石油大学(华东)机电工程学院

摘要(Abstract)：

用氨气作为渗剂,对35 CrMo钢进行不同时间的气体渗氮处理。借助光学显微镜和显微硬度计分别进行了渗氮层的微观组织观察和硬度测试,利用M398电化学综合测试系统测试了动电位极化曲线,并在高温高压反应釜中进行了CO2腐蚀行为的研究,利用SEM、EDS和XRD分析了腐蚀产物膜的结构和相组成。结果表明:35 CrMo钢经过气体渗氮后自腐蚀电位正移,自腐蚀电流密度下降;CO2高温高压模拟实验条件下,渗氮后平均腐蚀速度降低,腐蚀产物膜由致密、完整的晶体状FeCO3构成,有效降低35 CrMo钢的腐蚀速率。

关键词(KeyWords)： 35CrMo钢;气体渗氮;极化;CO2腐蚀

Abstract:

Keywords:

基金项目(Foundation): 山东省自然科学基金资助(Y2008F38);; 中央高校基本科研业务费专项资金资助(09CX04041A)

作者(Author): 王炳英,孙振铜,蒋文春,侯振波

DOI: 10.13289/j.issn.1009-6264.2011.12.028

参考文献(References)：

• [1]Li D G,Feng Y R,Bai Z Q,et al.Characteristics of CO2 corrosion scale formed on N80 steel in stratum water with saturated CO2[J].Applied SurfaceScience,2007,253:8371-8376.
• [2]Kermani M B,Morshed A.Carbon dioxide corrosion in oil and gas production-A compendium[J].Corrosion,2003,59(8):659-683.
• [3]周琦,贾建刚,赵红顺,等.X-60管线钢在含H2S及高温高压CO2酸性溶液中的腐蚀特征[J].金属热处理,2008,33(5):91-94.ZHOU Qi,JIA Jian-gang,ZHAO Hong-shun,et al.Corrosion characteristics of X-60 pipeline steel in acid solution of H2 S and CO2 under hightemperature and high pressure[J].Heat Treatment of Metals,2008,33(5):91-94.
• [4]王艳戎,黎桂江,沈保罗,等.球铁基体组织对QPQ盐浴渗氮层深度和耐磨性的影响[J].金属热处理,2009,34(11):89-91.WANG Yan-rong,LI Gui-jiang,SHEN Bao-luo,et al.Effect of microstructure of nodular cast iron on its nitrided layer depth and wear resistance byQPQ process[J].Heat Treatment of Metals,2009,34(11):89-91.
• [5]奚运涛,刘道新,韩栋,等.离子渗氮AISI420马氏体不锈钢耐蚀行为研究[J].材料热处理学报,2007,28(5):109-114.XI Yun-tao,LIU Dao-xin,HAN Dong,et al.Investigation on corrosion behavior of plasma nitrided AISI 420 martensitic stainless steel[J].Transactionsof Materials and Heat Treatment,2007,28(5):109-114.
• [6]于永泗,赵群,张立文,等.钛合金激光渗氮层的组织与性能研究[J].金属热处理,2003,28(12):21-24.YU Yong-si,ZHAO Qun,ZHANG Li-wen,et al.Structure and property pf nitriding layer on titanium alloy by laser[J].Heat Treatment of Metals,2003,28(12):21-24.
• [7]王吉会,房大然,张琨.38CrMoAlA、40Cr钢经不同渗氮工艺处理后的性能研究[J].金属热处理,2003,28(7):20-23.WANG Ji-hui,FANG Da-ran,ZHANG Kun.Properties of 38CrMoAlA and 40Cr steel after different nitriding processes[J].Heat Treatment of Metals,2003,28(7):20-23.
• [8]Lin Guan-fa,Zheng Mao-sheng,Bai Zhen-quan,et al.Wear resistance of CO2 corrosion product scale formed at high temperature[J].Journal of Ironand Steel Research,International,2006,13(5):47-52.
• [9]程义远,王勇,韩彬,等.35CrMoA钢激光淬火-渗氮复合处理微观组织与性能[J].中国激光,2010,37(1):250-255.CHENG Yi-yuan,WANG Yong,HAN Bin,et al.Microstructure and properties of 35CrMoA steel in laser quenching-nitriding[J].Chinese Journal ofLasers,2010,37(1):250-255.
• [10]李双喜,张铁成,张冠星,等.金相法与硬度法测量离子渗氮层深度差异性研究[J].金属热处理,2010,35(9):118-120.LI Shuang-xi,ZHANG Tie-cheng,ZHANG Guan-xing,et al.Measurement difference of plasma nitriding layer by metallography and hardness method[J].Heat Treatment of Metals,2010,35(9):118-120.

文章评论(Comment)：