支盛兴,袁家伟,李兴刚,石国梁,李永军,马鸣龙,张奎,蒲治军,曾孝云,刘俊,兰成均,郝爱国

• 1:有研科技集团有限公司有色金属材料制备加工国家重点实验室
• 2:有研工程技术研究院有限公司
• 3:北京有色金属研究总院
• 4:中国工程物理研究院机械制造工艺研究所

摘要(Abstract)：

采用多向锻造(MDF)对Mg-4Al-1Zn-0.5Mn合金进行塑性变形,利用光学显微镜和电子背散射衍射(EBSD)等分析了合金的组织与织构。结果表明:随着锻造道次的增加,合金中的小角度晶界比例减少,大角度晶界有所增加,晶粒细化,织构有所改变,织构强度降低,各向异性减弱,径向力学性能提高。经过6道次锻造后合金的径向晶粒最细,径向塑性最高。

关键词(KeyWords)： Mg-4Al-1Zn-0.5Mn合金;多向锻造;织构;力学性能

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 支盛兴,袁家伟,李兴刚,石国梁,李永军,马鸣龙,张奎,蒲治军,曾孝云,刘俊,兰成均,郝爱国

DOI: 10.13289/j.issn.1009-6264.2020-0624

参考文献(References)：

• [1] 陈振华.镁合金[M].北京:化学工业出版社,2004:80-82.CHEN Zhen-hua.Magnesium Alloy[M].Beijing:Chemical Industry Press,2004:80-82.
• [2] Victoria-Hernandez J,Yi S,Letzig D,et al.Microstructure and texture development in hydrostatically extruded Mg-Al-Zn alloys during tensile testing at intermediate temperatures[J].Acta Materialia,2013,61:2179-2163.
• [3] Cheng W L,Tian Q W,Yu H,et al.Strengthening mechanisms of indirect-extruded Mg-Sn based alloys at room temperature[J].Journal of Magnesium and Alloys,2014,2(4):299-304.
• [4] Park S S,You B S,Yoon D J.Effect of the extrusion conditions on the texture and mechanical properties of indirect-extruded Mg-3Al-1Zn alloy[J].Journal of Materials Processing Technology,2009,209:5940-5943.
• [5] Mordike B L,Ebert T.Magnesium:Properties—applications—potential[J].Materials Science and Engineering A,2001,302(1):37-45.
• [6] Yamashita A,Horita Z,Langdon T G.Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation[J].Materials Science and Engineering A,2001,300(1/2):142-147.
• [7] Xu C,Furukawa M,Horita Z,et al.The evolution of homogeneity and grain refinement during equal-channel angular pressing:Amodel for grain refinement in ECAP[J].Materials Science and Engineering A,2005,398(1/2):66-76.
• [8] Segal V M,Reznikovvi,Drotyshevkijae,et al.Plastic working of metals by simple shear[J].Russian Metallugy,1981,1:99-105.
• [9] 赵西成,解晨,王耿洁,等.90°模具室温4道次 ECAP 变形纯钛的宏观织构演变[J].稀有金属材料与工程,2013,42(6):1139-1145.ZHAO Xi-cheng,XIE Chen,WANG Geng-jie,et al.Macroscopic texture evolution of pure titaniμm deformed by 4 ECAP passes atroom temperature[J].Rare Metal Materials and Engineering,2013,42(6):1139-1145.
• [10] Liu M P,Jiang T H,Wang J,et al.Aging behavior and mechanical properties of 6013 aluminum alloy processed by severe plastic deformation[J].Transactions of Nonferrous Metals Society of China,2014,24(12):3858-3865.
• [11] Heczel A,Akbaripanah F,Salevati M A,et al.A comparative study on the microstructural evolution in AM60 alloy processed by ECAP and MDF[J].Journal of Alloys and Compounds,2018,763:629-637.
• [12] Chen C,Song L H,Du X H,et al.Enhanced mechanical property of AZ31B magnesium alloy processed by multi-directional forging method[J].Materials Characterization,2017,131:72-77.
• [13] Jamali A,Mahmudi R.Evolution of microstructure,texture,and mechanical properties in a multi-directionally forged ZK60 Mg alloy[J].Materials Science and Engineering A,2019,75(2):55-62.
• [14] Xia X S,Chen Q,Zhao Z D,et al.Microstructure,texture and mechanical properties of coarse-grained Mg-Gd-Y-Nd-Zr alloy processed by multidirectional forging[J].Journal of Alloys and Compounds,2015,62(3):62-68.
• [15] 赖林.Mg-Mn-Zn系镁合金组织与性能研究[D].北京:北京有色金属研究总院,2017.LAI Lin The research of Mg-Mn-Zn series magnesium alloy on the microstructure and properties[D].Beijing:General Research Institute for Nonferrous Metals,2017.

文章评论(Comment)：