解凯,贺志荣,刘继拓,解亚丹,姚凯

• 1:陕西理工学院材料科学与工程学院

摘要(Abstract)：

为了研制新型热镀锌合金,提高镀层性能,本研究在锌液中加入不同含量的Ti,配制成Zn-0.5Al-x Ti(x=0、0.03%、0.05%、0.07%、0.10%和0.12%,质量分数)合金镀浴,并在低碳钢板上进行了施镀。用光学显微镜、显微硬度计和全浸腐蚀实验对镀层的形貌和性能进行了表征。结果表明,添加适量Ti能有效减少锌灰、浮渣、锌瘤和镀层厚度,提高镀层的表面质量。随着Ti含量增加,镀层表面光洁度先降低后升高,镀层表面晶粒尺寸先减小后增大,镀层显微硬度和腐蚀速率先增加后减小再增加。当Ti含量为0.07%时,镀层的厚度较薄,镀层的光洁度、硬度和耐蚀性较好。

关键词(KeyWords)： 热浸镀;Zn-0.5Al-Ti合金;镀层形貌;镀层硬度;镀层腐蚀速率

Abstract:

Keywords:

基金项目(Foundation): 陕西省科技统筹创新工程计划(2011KTDZ01-03-06);; 陕西省大学生创新创业训练计划(1723);; 陕西理工学院研究生创新基金(SLGYCX1432)

作者(Author): 解凯,贺志荣,刘继拓,解亚丹,姚凯

DOI: 10.13289/j.issn.1009-6264.2014.s2.038

参考文献(References)：

• [1]朱烁金,朱丽慧,刘茜,等.热浸镀锌合金技术的研究现状[J].热处理,2008,23(3):20-23.ZHU Shuo-jin,ZHU Li-hui,LIU Qian,et al.The development of hot-dip technology for zinc alloy coatings[J].Heat Treatment,2008,23(3):20-23.
• [2]邵大伟,贺志荣,张永宏,等.热浸镀锌技术的研究进展[J].热加工工艺,2012,41(6):100-103.SHAO Da-wei,HE Zhi-rong,ZHANG Yong-hong,et al.Research progress of hot-dip galvanizing technology[J].Hot Working Technology,2012,41(6):100-103.
• [3]梅柳香.热浸镀锌合金的研究现状以及发展趋势[J].材料开发与应用,2011,26(5):88-90.MEI Liu-xiang.Development and research progress in hot-dip zinc alloy coatings[J].Development and Application of Materials,2011,26(5):88-90.
• [4]王怀涛,刘子利,徐文龙,等.Al含量对热浸镀锌合金耐蚀性的影响[J].腐蚀与防护,2013,34(2):133-137.WANG Huai-tao,LIU Zi-li,XU Wen-long,et al.Influence of Al contents on the corrosion performance of hot-dip zinc alloy[J].Corrosion and Protection,2013,34(2):133-137.
• [5]冯刚,袁侯静,袁张琳.钢铁成分及添加元素对热镀锌组织和性能的影响[J].热加工工艺,2011,40(4):118-121.FENG Gang,YUAN Hou-jing,YUAN Zhang-lin.Effects of steel composition and adding elements on microstructure and properties of hot dip galvanizing[J].Hot Working Technology,2011,40(4):118-121.
• [6]Faderl J.Current process and equipment developments in the field of hot dip galvanizing[J].Stahl und Eisen,2003,123(8):41-45.
• [7]Huang G.Galvanic corrosion of steel couples in seawater[C]∥Hou Baorong.Proceedings of the International Symposium of Marine Corrosion and Control,Qingdao:China Ocean Press,2000:290-295.
• [8]About E M T,Daoud A,Ismail A.Effect of different Al contents on the microstructure tensile and wear properties of Zn-based alloy[J].Materials Letters,2004,58(11):1754-1760.
• [9]贺志荣,何应,刘继拓,等.Al和RE对Zn-Al合金镀层组织和耐蚀性的影响[J].中国有色金属学报,2014,24(8):2020-2025.HE Zhi-rong,HE Ying,LIU Ji-tuo,et al.Effects of Al and RE on structure and corrosion resistance of Zn-Al alloy coatings[J].The Chinese Journal of Nonferrous Metals,2014,24(8):2020-2025.
• [10]许乔瑜,桂艳,卢锦堂,等.热浸Zn-Ti合金镀层的显微组织与耐蚀性能[J].华南理工大学学报:自然科学版,2008,36(7):82-86.XU Qiao-yu,GUI Yan,LU Jin-tang,et al.Microstructure and corrosion resistance of hot-dipped Zn-Ti coating[J].Journal of South China University of Technology:Natural Science Edition,2008,36(7):82-86.
• [11]Jin H M,Li Y.Study on the behavior of additives in steel hot-dip galvanizing by DFT calculations[J].Chemistry of Materials,2000,12(7):1879-1883.
• [12]Gloriant T,Reumont G,Perrot P.The Fe-Zn-Ti system at 450 degreesc[J].Zeitschrift fur Metallkunde.1997,88(7):539-544.
• [13]黄国雄,王胜民,何明奕,等.热浸镀Zn-Ti及Zn-Ti-Al合金层的耐蚀性能[J].材料保护,2010,43(12):11-13.HUANG Guo-xing,WANG Sheng-min,HE Ming-yi,et al.Corrosion resistance of hot-dipping Zn-Ti and Zn-Ti-Al coatings[J].Journal of Materials Protection,2010,43(12):11-13.
• [14]王在东,姚振玲,严清冉,等.国产热浸锌链条在海洋环境中的腐蚀初步探讨[J].全面腐蚀控制,2013,27(1):32-36.WANG Zai-dong,YAO Zhen-ling,YAN Qing-ran,et al.Primary discussion of the corrosion of domestic HDG chains in marine environment[J].Total Corrosion Control,2013,27(1):32-36.
• [15]卢锦堂,许乔瑜,孔纲.热浸镀技术与应用[M].北京:机械工业出版社,2006.

文章评论(Comment)：