吴文杰,王爱琴,谢敬佩,王荣旗

• 1:河南科技大学材料科学与工程学院

摘要(Abstract)：

利用单辊旋转甩带法制备快速凝固过共晶Al-30Si合金条带,对其进行不同温度下时效4 h和550℃下保温不同时间的时效处理,测定其硬度及耐磨性,采用扫描电镜(SEM)、透射电镜(TEM)及XRD技术对试验合金的微观组织进行表征,研究快速凝固合金时效处理后组织演变及性能。结果表明,快速凝固Al-30Si合金形成了微小初晶Si+纳米级颗粒状共晶硅弥散分布在α(Al)过饱和固溶体基体的复合组织;时效处理过程中,过饱和固溶的Si元素逐渐脱溶析出,以球状或依附于粒状共晶硅而析出生长;时效初期或时效温度较低时,初生硅发生缩颈、熔断、钝化,并逐渐粒化;随时效温度升高,硅相受扩散控制逐渐粗化长大,时效后期或时效温度达到550℃时,硅相逐渐以颗粒搭接和棱角小面特征长大,形态恶化。时效合金组织中硅相体积分数计算结果与定量金相测定结果基本一致。时效合金的显微硬度和耐磨性随时效温度的升高逐渐降低,室温润滑条件下的磨损机制主要为磨粒磨损。

关键词(KeyWords)： 时效处理;微晶Al-30Si合金;微观组织演变;性能

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51371077)

作者(Author): 吴文杰,王爱琴,谢敬佩,王荣旗

DOI: 10.13289/j.issn.1009-6264.2015.04.010

参考文献(References)：

• [1]杨伏良,甘卫平,陈招科,等.快速凝固/粉末冶金制备高硅铝合金材料的组织与力学性能[J].中国有色金属学报,2004,14(10):1717-1722.YANG Fu-liang,GAN Wei-ping,CHEN Zhao-ke,et al.Microstructures and mechanical properties of high-silicon aluminum alloy fabricated by rapid solidification/powder metallurgy[J].The Chinese Journal of Nonferrous Metals,2004,14(10):1717-1722.
• [2]王爱琴,谢敬佩,刘忠霞,等.快速凝固Al-Si合金的组织形态及相结构[J].材料热处理学报,2008,29(2):99-102.WANG Ai-qin,XIE Jing-pei,LIU Zhong-xia,et al.Microstructure and phase structure of rapidly solidified Al-Si alloy[J].Transactions of Material and Heat Treatment,2008,29(2):99-102.
• [3]沈军,谢壮德,董寅生,等.快速凝固铝硅合金的性能、应用及发展方向[J].粉末冶金技术,2000,18(3):208-213.SHEN Jun,XIE Zhuang-de,DONG Yin-sheng,et al.Properties,Application and developing trend of rapidly solidified aluminum-silicon alloys[J].Powder Metallurgy and Technology,2000,18(3):208-213.
• [4]Zhou J,Juszacyk J.Fractre features of silicon-disprersed aluminium alloy extruded from rapidly solidified powder[J].J Mater Sci,1990,2(5):41-45.
• [5]刘红伟,张永安,朱宝宏,等.喷射成形70Si30Al电子封装材料致密化处理及组织性能研究[J].稀有金属,2007,312(4):446-450.LIU Hong-wei,Zh ANG Yong-an,ZHU Bao-hong,et al.Research on densification processing,microstructure and properties of spray-formed 70Si30Al alloys used for electronic packaging[J].Rare Metals,2007,312(4):446-450.
• [6]张大童,李元元,罗宗强.快速凝固过共晶铝硅合金材料的研究进展[J].轻合金加工技术,2001,29(2):1-6.ZHANG Da-tong,LI Yuan-yuan,LUO Zong-qiang.A review on the progress of rapidly solidified hypereutectic Al-Si alloy materials[J].The Process Technology of Light Alloys,2001,29(2):1-6.
• [7]郑喜军,米国发.碳化硅颗粒增强铝基复合材料的研究现状及发展趋势[J].热加工工艺,2011,40(12):92-96.ZHENG Xi-jun,MI Guo-fa.Research status and development trend of Si Cp/Al composite[J].Hot Working Technology,2011,40(12):92-96.
• [8]张建新,高爱华.Si含量对6063铝合金组织性能的影响[J].材料热处理学报,2008,29(5):73-75.ZHANG Jian-xin,GAO Ai-hua.Influence of Si content on microstructure and properties of 6063 aluminum alloy[J].Transactions of Material and Heat Treatment,2008,29(5):73-75.
• [9]Uzun O,Karaaslan T,Gogebakan M,et al.Hardness and Microstructural characteristics of rapidly solidied Al-8-16 wt.%Si alloys[J].Journal of Alloys and Compounds,2004,376:149-157.
• [10]徐映坤,宋治鉴,张永昌.Si相尺寸对快凝Al-20Si-1.3Cu-Mg合金机械性能的影响[J].材料科学与工艺,1994,2(1):59-63.XU Yin-kun,SONG Zhi-jian,Zh ANG Yong-chang.Effect of Si phase particle size on the mechanical propertie of rapidly solidified Al-20Si-1.3Cu-1Mg alloy[J].Materials Science and Technology,1994,2(1):59-63.
• [11]李志辉,张永安,熊柏青,等.快速凝固硅铝合金材料的组织与性能[J].稀有金属材料与工程,2010,39(9):1659-1663.LI Zhi-hui,Zh ANG Yong-an,XIONG Bai-qing,et al.Microstructure and properties of rapidly solidified silicon-aluminum alloy materials[J].Rare Metal Materials and Engineering,2010,39(9):1659-1663.
• [12]孙瑜,陈晋,孙国雄.铝硅合金硅相演变及其对力学性能的影响[J].特种铸造及有色合金,2001(6):1-3SUN Yu,CHEN Jin,SUN Guo-xiong.Evolution of Si phase in Al-Si alloy and its effect on mechanical properties[J].Special Casting&Nonferrous Alloys,2001(6):1-3.

文章评论(Comment)：