杨钒,黄建龙

• 1:兰州理工大学机电学院

摘要(Abstract)：

用X射线衍射(XRD)、磁针法、力学性能和显微分析研究了商用热轧态和冷轧态304奥氏体不锈钢在不同变形方式下应变诱发马氏体的行为。结果表明:304钢热轧态由于存在多量碳化物和组织不均匀性,其奥氏体稳定性低,拉伸应变诱发马氏体量达40%,冷轧(固溶)态组织均匀、奥氏体稳定性高,拉伸应变诱发马氏体量仅9%;304冷轧板材扩孔、杯突成形时其切向和径向的二向拉应力有助于γ→α'转变,诱发马氏体量(30%～35%)多于单向拉应力的拉伸诱发马氏体量(8%～10%)。对于冷轧304不锈钢,在20%以上拉伸工程应变的驱动下才能较明显地诱发马氏体。304明显的强化效果(△σ达320～400 MPa)来自应变硬化和马氏体相变强化两方面:冷轧304钢的强化主要来自应变硬化本身;热轧304钢的强化不光有应变硬化的贡献,还有应变诱发的多量马氏体的重要贡献,而且后者是主要的。

关键词(KeyWords)： 奥氏体不锈钢;304钢;应变诱发马氏体;热轧态;冷轧态

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 杨钒,黄建龙

DOI: 10.13289/j.issn.1009-6264.2012.03.022

参考文献(References)：

• [1]严彪.不锈钢手册[M].北京:化学工业出版社,2009.
• [2]肖纪美.不锈钢的金属学问题[M].北京:冶金工业出版社,2006.
• [3]Choi J Y,Won Jin.Strain induced martensite formation and its effect on strain hardening behavior in cold drawn AISI 304 austenitic stainless steel[J].Scripta Materialia,1997,36(1):99-104.
• [4]Gonzalez B M,Castro C S B,Buono V T L,et al.The influence of copper addition on the formability of AISI 304 stainless steel[J].Materials Scienceand Engineering A,2003,343:51-56.
• [5]Do-Yeal Ryoo.Effect of Ni content on the tensile properties and strain-induced martensite transformation for 304 stainless steel[J].Material ScienceEngineering A,2011,528(6):2277-2281.
• [6]Arpan Das.Morphologies and characteristics of deformation induced martensite during tensile deformation of 304LN stainless steel[J].MaterialScience Engineering A,2008,486(1-2):283-286.
• [7]Hedstrm P.Load partitioning and strain-induced martensite formation during tensile toading of a metastable austenitic stainless steel[J].Matall MaterTrans A,2009,40(5):1039-1048.
• [8]Ravi Kumar B.Role of strain-induced martensite on microstructural evolution during annealing of metastable austenitic stainless steel[J].Mater Sci,2010,45(4):911–918.
• [9]Kireeva I V,Chumlyakov Yu I.The orientation dependence ofγ→α'martensitic transformation in austenitic stainless steel single crystals with lowstacking fault energy[J].Material Science and Engineering A,2008,481-482(5):737-741.
• [10]杨卓越,王建.304奥氏体不锈钢热诱发马氏体相变研究[J].材料热处理学报,2008,29(1):98-101.YANG Zhuo-yue,WANG Jian.Thermal-induced martensite transformation in 304 austenitic stainless steel[J].Transactions of Materials and HeatTreatment,2008,29(1):98-101.
• [11]徐飙,王龙妹,朱京希,等,节镍型奥氏体不锈钢冷轧断带的影响因素[J].金属热处理,2007,32(6):111-113.XU Biao,WANG Long-mei,ZHU Jing-xi,et al.Influence factors of strip breakage of cold-rolled low-Ni austenite stainless steel[J].Heat Treatment ofMetals,2007,32(6):111-113.

文章评论(Comment)：