D. Becker,S. Wagner, D.G. Teer

• 1:Institute for Metal Forming Technology
• 2: Stuttgart University
• 3: Stuttgart
• 4: Germany

摘要(Abstract)：

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): D. Becker,S. Wagner, D.G. Teer

参考文献(References)：

• 1.B.C.Stupp,Synergistic effects of metals co-sputtered with MoS2Thin Solid Films,84(1981)257-266.
• 2.V.Fox,J.Hampshire,D.Teer,MoS2/metal composite coatings deposited by closed-dield unbalenced magnetron sputtering:tribological properties and industrial uses.Surf.Coat.Technol.,112(1999)118-122.
• 3.N.M.Renevier,V.C.Fox,D.G.Teer,J.Hampshire,Coating characteristics and tribological properties of sputter-deposited MoS2/metal composite coatings deposited by colsed field unbalanced magnetron sputter ion plating,Surf.Coat.Technol.,127(2000)24-37.
• 4.J.R.Lince,M.R.Hilton,A.S.Bommannavar,MoS2.KOK solid solutions in thin films produced by rf-sputter-deposition,J.Mater.Res.,10(8)(1995)2091-2105
• 5.M.C.Simmonds,A.Saven,E.Pfluger,H.Van Swygenhoven,Mechanical and tribological performance of MoS2co-sputtered composites,Surf.Coat.Technol.,126(2000)15-246.T.Spalvins,Frictional and morphological properties of Au-MoS2films sputtered from a compact target,Thin solid Films,118(1984)375-395
• 7.P.Niederhauser,H.E.Hintermann and M.Maillat,Moisture-resistant MoS2-based composite lubricant films,Thin Solid Films,108(1983)209-218.
• 8.J.S.Zabinski,M.S.Donley,VJ.Duhouse,N.T.McDevitt,Chemical and tribological characterization of PbO-MoS2films grown by pulsed laser deposition,Thin Solid Films,214(1992)156-163.
• 9.M.R.Hilton,Microstructure of cosputer-deposited metal-and oxide-MoS2solid lubricant thin films,J.Mater.Res.,13(4)(1998)1022-1032.
• 10.De-Yang Yu,Jun-An Wang,Jin-Lin Ou Yang,Variations of properties of the MoS2-LaF3cosputtered and MoS2-sputtered films after storage in moist air,Thin Solid Films,293(1997)1-5
• 11.R.Gilmore,M.A.Baker,P.N.Gibaon,W.Gissler,Preparation and characterisation of low-friction TiB2-based coatings by incorporation of C or MoS2,Surf.Coat.Technol.,105(1998)45-50
• 12.R.Goller,P.Torri,M.A.Baker,R.Gilmore,W.Gissler,The deposition of low-friction TiN-MoSx hard coatings by a combined arc evaporation and magnetron sputter process,Surf.Coat.Technol.,120-121(1999)453-457
• 13.A.A.Voevodin,J.P.Oneill,J.S.Zabinski,Nanocomposite tribological coatings for aerospace applications,Surf.Coat.Technol.,116-119(1999)36-45
• 14.M.R.Hilton,R.Bauer,S.V.Didziulis,M.T.Dugger,J.M.Keem,J.Scholhamer,Structural and tribological studies of MoS2solid lubricant films having trailored metal-multilayer nanostructures,Surf.Coat.Technol.,53(1992)13-23.
• 15.G.Jayaram,L.D.Marks,M.R.Hilton,Nanostructure of Au-
• 20%Pd layers in MoS2multilayer solid lubricant films,Surf.Coat.Technol.,76-77(1995)393-399
• 16.Da-Yung Wang,Chi-Lung Chang,Zie-Yih Chen,Wei-Yu Ho,Mcriostructural and tribological characterization of MoS2-Ti composite solid lubricating films,Surf.Coat.Technol.,120-121(1999)629-635
• 17.M.C.Simmonds,A.Savan,H.Van Swyenhoven,E.Pfluger,S.Mikhailov,Structure,morphological,chemical and tribological investigations of sputter deposited MoSx/metal multilayer coatings,Surf.Coat.Technol.,108-109(1998)340-344
• 18.K.Kobs,H.Dimigen,H.Hubsch,H.J.Tolle,R.Leutenecker,H.Ryssel,Enhanced endurance life of sputtered MoSx films on steel by ion beam mixing.Mater.Sci.Eng.,90(1987)281-286.
• 19.Huiwen Liu and Xushou Zhang,Improved tribological properties of sputtered MoS2films through N+implantation,Thin Solid Films,240(1994)97-100.
• 20.H.Liu,X.Zhang,D.Yu,X.Wang,The enhancement of wear life and moisture resistance of sputtered MoS2films by metal ion implantation,Wear,173(1994)145-149.
• 21.N.J.Mikkelsen,G.Sorensen,Solid lubricating films produced by ion bomberdment of sputter deposited MoSx films,Surf.Coat.Technol.,51(1992)118-123.
• 22.K.J.Wahl,D.N.Dunn,I.L.Singer,Effects of ion implantation on microstructure,endurence and wear behavior of IBED MoS2,Wear,237(2000)1-11
• 23.T.R.Jervis,J-P.Hirvonen,M.Nastasi,Post deposition excimer laser processing of MoSx thin films,J.Mater.Res.,6(6)(1991)1350-1357.
• 24.T.R.Jervis,M.Nastasi,R.Bauer,P.O.Fleischauer,Laser surface processing of molybdenum disulfide thin films,Thin Solid Films,181(1989)475-483
• 25.J.-P.Hirvonen,J.Koskinen,J.R.Jervis,M.Nastasi,Present prograss in the development of low friction coatings,Surf.Coat.Technol.,80(1996)139-150
• 26.L.E.Pope,T.R.Jervis and M.Nastasi,Effects of laser processing and doping on the lubrication and chemical properties of thin MoS2films,Surf.Coat.Technol.,42(1990)217-225
• 27.R.N.Bolster,I.L.Singer,J.C.Wegand,S.Fayeulle,C.R.Gossett,Preparation by ion-beam-assisted deposition,analysis and tribological behavior of MoS2films,Surf.Coat.Technol.,46(1991)207-216
• 28.Da-Yung Wang,Chi-Lung Chang,Wei-Yu Ho,Microstructure analysis of MoS2diposited on diamond-like carbon films for wear improvement,Surf.Coat.Technol.,111(1999)123-127
• 29.T.Spalvins,Coatings for wear and lubrication Thin Solid Films,53(1978)285-300
• 30.N.M.Renevier,J.Hamphire,V.C.Fox,J.Witts,T.Allen,D.G.Teer,Advantages of using self-lubricating,hard,wear-resistant MoS2-based coatings,Surf.Coat.Technol.,142-144(2001)67-77
• 31.V.C.Fox,N.Renevier,D.G.Teer,J.Hampshire and V.Rigato,The structure of tribologically improved MoSr metal composite coatings and their industrial applications,Surf.Coat.Technol.,116-119(1999)492-497
• 32.N.M Renevier,N.Lobiondo,V.C Fox,D.G Teer and J.Hampshire Performance of MoS2/metal composite coatings used for dry machining and other industrial applications,Surf.Coat.Technol.,123(2000)84-91
• 33.Annual report on Eco-Stamp project by IFU
• 34.N.Rafieian,N Renevier,D G Teer and S Barnes,Test of the effect of MoST coatings on drill performance,Proceedings of5th international conference on behaviour of materials in machining,loM Communications Ltd UK,12-13Nov.2002,Chester,UK,p.111-120

文章评论(Comment)：