许文花,肖桂勇,陈鹭滨,吕宇鹏

• 1:山东大学材料液固结构演变与加工教育部重点实验室
• 2:山东大学材料科学与工程学院

摘要(Abstract)：

对37CrMnMo钢进行气体渗氮处理,利用金相显微镜、X射线衍射仪、扫描电镜及磨损试验机研究了渗氮层的组织、相组成及耐磨性等。结果表明,氮化试样的耐磨性均优于调质试样,若要进一步提高耐磨性,需优化渗氮工艺获得10μm以上的γ'单相化合物层。

关键词(KeyWords)： 气体渗氮;渗氮层;耐磨性

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 许文花,肖桂勇,陈鹭滨,吕宇鹏

DOI: 10.13289/j.issn.1009-6264.2015.s2.037

参考文献(References)：

• [1]高建明.材料力学性能[M].武汉:武汉理工大学出版社,2004:95-96.
• [3]卑多慧,吕坚,顾剑锋,等.表面纳米化预处理对低碳钢气体渗氮行为的影响[J].材料热处理学报,2002,23(1):19-24.BEI Duo-hui,LJian,GU Jian-feng,et al.Effects of surface nanocrystallization pre-treatment on gas nitriding behavior of mild steel[J].Transactions of Materials and Heat Treatment,2002,23(1):19-24.
• [4]佟伟平,陶乃镕,王镇波,等.纳米结构纯铁的气体渗氮[J].热处理,2007,22(2):11-14.TONG Wei-ping,TAO Nai-rong,WANG Zhen-bo,et al.Gas nitriding of nanocrystalline Iron[J].Heat Treatment,2007,22(2):11-14.
• [5]Tong W P,Han Z,Wang L M,et al.Low-temperature nitriding of 38Cr Mo Al steel with a nanostructured surface layer induced by surface mechanical attrition treatment[J].Surface&Coatings Technology,2008,202:4957-4963.
• [6]葛利玲,卢正欣,井晓天,等.0Cr18Ni9不锈钢表面纳米化组织及其热稳定性对低温渗氮行为的影响[J].金属学报,2009,45(5):566-572.GE Li-ling,LU Zheng-xin,JING Xiao-tian,et al.Eefect of surface nanodrystallization and thermal stability of 0Cr18Ni9 stainless steel on low temperature nitriding behavior[J].Acta Metallurgica Sinica,2009,45(5):566-572.
• [7]Sun J,Tong W P,Zuo L,et al.Low-temperature plasma nitriding of titanium layer on Ti/Al clad sheet[J].Materials&Design,2013,47:408-415.
• [8]龙发进,周上祺,刘林飞,等.氮化-氧化复合工艺研究进展[J].热加工工艺,2004(5):50-52.LONG Fa-jin,ZHOU Shang-qi,LIU Lin-fei,et al.Research progress on nitriding and oxidation combined processes[J].Hot Working Technology,2004(5):50-52.
• [9]张怀青,吴新涛,孙建军.预氧化法气体快速渗氮工艺分析与应用[J].金属热处理,2001,26(11):31-33.ZHANG Huai-qing,WU Xin-tao,SUN Jian-jun.Analysis and application of rapid gas nitriding process with preoxidizing method[J].Heat Treatment of Metals,2001,26(11):31-33.
• [10]周潘兵,周浪.氧化层对渗氮动力学的影响[J].材料热处理学报,2005,26(4):102-105.ZHOU Pan-bing,ZHOU Lang.Effect of oxide layer on kinetics of nitridation[J].Transactions of Materials and Heat Treatment,2005,26(4):102-105.
• [11]Karimzadeh N,Moghaddam E G,Mirjani M,et al.The effect of gas mixture of post-oxidation on structure and corrosion behavior of plasma nitrided AISI 316 stainless steel[J].Applied Surface Science,2013,283:584-589.
• [12]Li C X,Bell T,Dong H.A study of active screen plasma nitriding[J].Surface Engineering,2002,18(3):174-181.
• [13]李广宇,王中一,陈琳,等.活性屏等离子体源渗氮技术原理及应用[J].金属热处理,2013,38(2):9-14.LI Guang-yu,WANG Zhong-yi,CHEN Lin,et al.Principle and application of active screen plasma source nitriding[J].Heat Treatment of Metals,2013,38(2):9-14.
• [14]Spies H J,Burlacov I,Borner K,et al.IFHTSE Global 21:heat treatment and surface engineering in the twenty-first century.Active screen plasma nitriding and nitrocarburising of steels:an overview[J].International Heat Treatment and Surface Engineering,2014,8(3):94-106.
• [15]胡明娟,潘健生,毛立忠,等.短时渗氮工艺的研究[J].金属热处理,1997,32(5):3-7.HU Ming-juan,PAN Jian-sheng,MAO Li-zhong,et al.Study on short-time nitriding process[J].Heat Treatment of Metals,1997,32(5):3-7.
• [16]孙炳超,杨如生,江峥,等.在密封箱式炉中的短时气体渗氮[J].金属热处理,2000,35(7):40-42.SUN Bing-chao,YANG Ru-sheng,JIANG Zheng,et al.Short time nitriding process in sealed box-type furnace[J].Heat Treatment of Metals,2000,35(7):40-42.
• [17]胡明娟,潘健生.钢铁化学热处理原理[M].上海:上海交通大学出版社,1996:60-69.

文章评论(Comment)：