陈斌锴,张启富,郝晓东,仲海峰,俞钢强

• 1:新冶高科技集团有限公司先进金属材料涂镀国家工程实验室

摘要(Abstract)：

通过SEM和AFM研究了IF440高强钢钢板入锅温度和浸镀时间对镀层抑制层组织结构的影响。结果表明,抑制层的组织结构分为粗晶区Fe2Al5相和细晶区FeAl3相,并且随钢板入锅温度升高和浸镀时间增加,细晶区晶粒逐渐长大,直至与粗晶区晶粒尺寸一致,抑制层晶粒粗化,致密性下降致使其抑制作用降低。IF440高强钢适宜热镀锌工艺:钢板入锅温度为460~470℃,浸镀时间为4~6 s。

关键词(KeyWords)： IF440高强钢;热镀锌工艺;抑制层;组织

Abstract:

Keywords:

基金项目(Foundation): 北京市科技计划项目(D07010300700702)

作者(Author): 陈斌锴,张启富,郝晓东,仲海峰,俞钢强

DOI: 10.13289/j.issn.1009-6264.2014.05.036

参考文献(References)：

• [1]张启富,刘邦津,黄建中.现代钢带连续热镀锌[M].北京:冶金工业出版社,2007:460-467.
• [2]Monojit D,Shiv B S.Effect of strip temperature on the formation of an Fe2Al5 inhibition layer during hot-dip galvanizing[J].Scripta Materialia,2009,60(8):643-646.
• [3]Chen L H,Richard F,Joseph M D.Short term formation of the inhibition layer during continuous hot-dip galvanizing[C]//Osaka:Galvatech’07 7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet,2007:321-326.
• [4]Paik D J,Kim M S,Jee C W,et al.Reactions of the steel substrates in a molten zinc bath to form an inhibition layer at the interface and precipitation of the dross particles during galvannealing process[C]//Osaka:Galvatech’07 7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet,2007:315-320.
• [5]Asaki T,Yakou T.Effects of heat treatment conditions on formation of Fe-Al alloy layer during high temperature aluminizing[J].ISIJ International,2007,47(7):1016-1022.
• [6]Chen H B,Yang K C,Hsieh C K,et al.Effect of Galvanizing parameters on the microstructure of hot-dip galvaied steel sheet for automobotive panals[C]//Osaka:Galvatech’07 7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet,2007:297-302.
• [7]袁训华,江社明,张启富.BH390钢热镀锌抑制层及其合金化镀层界面结构[J].材料热处理学报,2011,32(5):127-132.YUAN Xun-hua,JIANG She-ming,ZHANG Qi-fu.Formation and interface structure of inhibition layers in hot-dip galvanized coating on steel BH390[J].Transactions of Material and Meat Treatment,2011,32(5):127-132.

文章评论(Comment)：